D 23 52
Explanations Symbol in the display
- Engine stop:
Display for all error messages
with machine stop.
- Hydraulic filter.
The hydraulic filter must be replaced.
A
Replace filter element acc. to Maintenance
Instructions!
- Engine oil pressure
m
The oil pressure is insufficient.
Switch off the engine immediately!
For other possible errors, see engine's oper-
ating instructions.
A
This error is displayed together
with "Error Message".
- Hydrostatic travel drive oil pressure indicator
m
The oil pressure is insufficient.
Switch off the engine immediately!
For other possible errors, see engine's
operating instructions.
- Emergency mode active
- Vehicle error.
The control unit reports one or several malfunc-
tions that cause the vehicle to shut down.
It may be possible to continue operating the vehicle
in the emergency mode.
A
Error details can be viewed in
the "Error memory" display menu.
- Master display communication error
Communication between master and display
is interrupted / emergency stop button
has been pressed
To Next Page
Loading...