EasyManua.ls Logo

Dynapac MF2500CS - Page 295

Dynapac MF2500CS
626 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D 30 37
The illuminated balloon generates shadow-reducing and anti-dazzle light.
f
The illuminated balloon makes the paver finisher higher and wider.
f
Note the passage height of bridges and tunnels and the enlarged vehicle width.
f
Always disconnect the power supply before working on the illuminated balloon!
f
Never look directly in the balloon when it is switched on!
f
The illuminated balloon must not be used in the vicinity of highly flammable materials
(e.g. petrol and gas); a safety distance of at least 1 metre must be maintained from
combustible materials.
f
Ensure that the area above the balloon is free and open without any power lines and
hindrances. There should be a linear distance of at least 50 m between overhead high
voltage power lines and the illuminated balloon. There should be a distance of
at least 2.5 m between overhead power lines and railway tracks with overhead lines
on the one hand, and the balloon on the other.
f
The illuminated balloon must not be operated if there is any damage to the electric
supply cables or connectors, the lamp or the balloon skin.
m
Never operate the balloon unsupervised or with a strong wind!

Table of Contents