C
HAPTER
41
| OAM Commands
– 1009 –
EXAMPLE
Console#show efm oam event-log interface 1/1
OAM event log of Eth 1/1:
00:24:07 2001/01/01
"Unit 1, Port 1: Dying Gasp at Remote"
Console#
show efm oam
remote-loopback
interface
This command displays the results of OAM remote loopback test.
SYNTAX
show efm oam remote-loopback interface [interface-list]
interface-list - unit/port
unit - Unit identifier. (Range: 1)
port - Port number or list of ports. To enter a list, separate
nonconsecutive port identifiers with a comma and no spaces;
use a hyphen to designate a range of ports. (Range: 1-10)
COMMAND MODE
Normal Exec, Privileged Exec
EXAMPLE
Console#show efm oam remote-loopback interface 1/1
Port OAM loopback Tx OAM loopback Rx
---- --------------- ---------------
1/1 2300 2250
Console#
show efm oam
status interface
This command displays OAM configuration settings and event counters.
SYNTAX
show efm oam status interface [interface-list] [brief]
interface - unit/port
unit - Unit identifier. (Range: 1)
port - Port number or list of ports. To enter a list, separate
nonconsecutive port identifiers with a comma and no spaces;
use a hyphen to designate a range of ports. (Range: 1-10)
brief - Displays a brief list of OAM configuration states.
COMMAND MODE
Normal Exec, Privileged Exec
To Next Page
Loading...
Need help?
General