Edge-Core ES3510MA-DC - Figure 139: Configuring AAA Server Groups

C HAPTER 14 | Security Measures
AAA Authorization and Accounting
– 274 –
To configure the RADIUS or TACACS+ server groups to use for accounting
and authorization:
1. Click Security, AAA, Server.
2. Select Configure Group from the Step list.
3. Select Add from the Action list.
4. Select RADIUS or TACACS+ server type.
5. Enter the group name, followed by the index of the server to use for
each priority level.
6. Click Apply.
Figure 139: Configuring AAA Server Groups
To show the RADIUS or TACACS+ server groups used for accounting and
authorization:
1. Click Security, AAA, Server.
2. Select Configure Group from the Step list.
3. Select Show from the Action list.