C
HAPTER
32
| Address Table Commands
– 779 –
EXAMPLE
Console(config)#mac-address-table static 00-e0-29-94-34-de interface ethernet
1/1 vlan 1 delete-on-reset
Console(config)#
clear mac-address-
table dynamic
This command removes any learned entries from the forwarding database.
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
EXAMPLE
Console#clear mac-address-table dynamic
Console#
show mac-address-
table
This command shows classes of entries in the bridge-forwarding database.
SYNTAX
show mac-address-table [address mac-address [mask]]
[interface interface] [vlan vlan-id]
[sort {address | vlan | interface}]
mac-address - MAC address.
mask - Bits to match in the address.
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10)
port-channel channel-id (Range: 1-5)
vlan-id - VLAN ID (Range: 1-4093)
sort - Sort by address, vlan or interface.
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
COMMAND USAGE
â—† The MAC Address Table contains the MAC addresses associated with
each interface. Note that the Type field may include the following types:
To Next Page
Loading...
Need help?
General