C
HAPTER
15
| Basic Administration Protocols
Link Layer Discovery Protocol
– 375 –
WEB INTERFACE
To display LLDP information for the local device:
1. Click Administration, LLDP.
2. Select Show Local Device Information from the Step list.
3. Select General, Port, or Trunk.
Figure 211: Displaying Local Device Information for LLDP (General)
Figure 212: Displaying Local Device Information for LLDP (Port)
DISPLAYING LLDP
R
EMOTE PORT
INFORMATION
Use the Administration > LLDP (Show Remote Device Information) page to
display information about devices connected directly to the switch’s ports
which are advertising information through LLDP, or to display detailed
information about an LLDP-enabled device connected to a specific port on
the local switch.
CLI REFERENCES
â—† "show lldp info remote-device" on page 953
To Next Page
Loading...
Need help?
General