Edge-Core ES3510MA-DC User Manual

C HAPTER 21 | System Management Commands
System Status
– 520 –
■
Interface settings
■
Any configured settings for the console port and Telnet
EXAMPLE
Console#show running-config
Building startup configuration. Please wait...
!<stackingDB>00</stackingDB>
!<stackingMac>01_00-e0-0c-00-00-fd_00</stackingMac>
!
snmp-server community public ro
snmp-server community private rw
!
snmp-server enable traps authentication
!
username admin access-level 15
username admin password 7 21232f297a57a5a743894a0e4a801fc3
username guest access-level 0
username guest password 7 084e0343a0486ff05530df6c705c8bb4
enable password level 15 7 1b3231655cebb7a1f783eddf27d254ca
!
vlan database
VLAN 1 name DefaultVlan media ethernet state active
VLAN 4093 media ethernet state active
!
spanning-tree mst configuration
!
interface ethernet 1/1
switchport allowed vlan add 1 untagged
switchport native vlan 1
switchport allowed vlan add 4093 tagged
.
.
.
!
interface vlan 1
ip address dhcp
ip dhcp client class-id text Edge-Core
!
line console
!
line vty
!
end
!
Console#
RELATED COMMANDS
show startup-config (520)
show startup-config This command displays the configuration file stored in non-volatile memory
that is used to start up the system.
COMMAND MODE
Privileged Exec
COMMAND USAGE
◆ Use this command in conjunction with the show running-config
command to compare the information in running memory to the
information stored in non-volatile memory.

Edge-Core ES3510MA-DC Specifications

General

Brand	Edge-Core
Model	ES3510MA-DC
Category	Switch
Language	English