Edge-Core ES3510MA-DC - Figure 204: Displaying the Binding Table for DHCP Snooping

C HAPTER 14 | Security Measures
DHCP Snooping
– 362 –
dynamic DHCP snooping entries to flash memory. These entries will be
restored to the snooping table when the switch is reset. However, note
that the lease time shown for a dynamic entry that has been restored
from flash memory will no longer be valid.
◆ Clear – Removes all dynamically learned snooping entries from flash
memory.
WEB INTERFACE
To display the binding table for DHCP Snooping:
1. Click Security, IP Source Guard, DHCP Snooping.
2. Select Show Information from the Step list.
3. Use the Store or Clear function if required.
Figure 204: Displaying the Binding Table for DHCP Snooping