C
HAPTER
17
| IP Services
Configuring Static DNS Host to Address Entries
– 450 –
WEB INTERFACE
To configure static entries in the DNS table:
1. Click IP Service, DNS, Static Host Table.
2. Select Add from the Action list.
3. Enter a host name and the corresponding address.
4. Click Apply.
Figure 273: Configuring Static Entries in the DNS Table
To show static entries in the DNS table:
1. Click IP Service, DNS, Static Host Table.
2. Select Show from the Action list.
Figure 274: Showing Static Entries in the DNS Table
To Next Page
Loading...
Need help?
General