C
HAPTER
25
| General Security Measures
Web Authentication
– 669 –
EXAMPLE
Console(config)#web-auth login-attempts 2
Console(config)#
web-auth quiet-
period
This command defines the amount of time a host must wait after exceeding
the limit for failed login attempts, before it may attempt web
authentication again. Use the no form to restore the default.
SYNTAX
web-auth quiet-period time
no web-auth quiet period
time - The amount of time the host must wait before attempting
authentication again. (Range: 1-180 seconds)
DEFAULT SETTING
60 seconds
COMMAND MODE
Global Configuration
EXAMPLE
Console(config)#web-auth quiet-period 120
Console(config)#
web-auth session-
timeout
This command defines the amount of time a web-authentication session
remains valid. When the session timeout has been reached, the host is
logged off and must re-authenticate itself the next time data transmission
takes place. Use the no form to restore the default.
SYNTAX
web-auth session-timeout timeout
no web-auth session timeout
timeout - The amount of time that an authenticated session
remains valid. (Range: 300-3600 seconds)
DEFAULT SETTING
3600 seconds
COMMAND MODE
Global Configuration
To Next Page
Loading...
Need help?
General