C
HAPTER
18
| Multicast Filtering
Filtering and Throttling IGMP Groups
– 475 –
◆ Max Multicast Groups – Sets the maximum number of multicast
groups an interface can join at the same time. (Range: 1-255;
Default: 255)
◆ Current Multicast Groups – Displays the current multicast groups the
interface has joined.
◆ Throttling Action Mode – Sets the action to take when the maximum
number of multicast groups for the interface has been exceeded.
(Default: Deny)
â–
Deny - The new multicast group join report is dropped.
â–
Replace - The new multicast group replaces an existing group.
◆ Throttling Status – Indicates if the throttling action has been
implemented on the interface. (Options: True or False)
WEB INTERFACE
To configure IGMP filtering or throttling for a port or trunk:
1. Click Multicast, IGMP Snooping, Filter.
2. Select Configure Interface from the Step list.
3. Select a profile to assign to an interface, then set the maximum
number of allowed multicast groups and the throttling response.
4. Click Apply.
Figure 292: Configuring IGMP Filtering and Throttling Interface Settings
To Next Page
Loading...
Need help?
General