C
HAPTER
39
| LLDP Commands
– 953 –
EXAMPLE
Console#show lldp info local-device
LLDP Local System Information
Chassis Type : MAC Address
Chassis ID : 00-01-02-03-04-05
System Name :
System Description : ES3510MA-DC
System Capabilities Support : Bridge
System Capabilities Enable : Bridge
Management Address : 192.168.0.101 (IPv4)
LLDP Port Information
Port PortID Type PortID Port Description
-------- ---------------- ----------------- --------------------------------
Eth 1/1 MAC Address 00-12-CF-DA-FC-E9 Ethernet Port on unit 0, port 1
Eth 1/2 MAC Address 00-12-CF-DA-FC-EA Ethernet Port on unit 0, port 2
Eth 1/3 MAC Address 00-12-CF-DA-FC-EB Ethernet Port on unit 0, port 3
Eth 1/4 MAC Address 00-12-CF-DA-FC-EC Ethernet Port on unit 0, port 4
.
.
.
Console#show lldp info local-device detail ethernet 1/1
LLDP Port Information Details
Port : Eth 1/1
Port Type : MAC Address
Port ID : 00-12-CF-DA-FC-E9
Port Description : Ethernet Port on unit 0, port 1
MED Capability : LLDP-MED Capabilities
Network Policy
Location Identification
Extended Power via MDI - PSE
Extended Power via MDI - PD
Inventory
Console#
show lldp info
remote-device
This command shows LLDP global and interface-specific configuration
settings for remote devices attached to an LLDP-enabled port.
SYNTAX
show lldp info remote-device [detail interface]
detail - Shows configuration summary.
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10)
port-channel channel-id (Range: 1-5)
COMMAND MODE
Privileged Exec