To Next Page

To Previous Page

HAPTER

| CFM Commands

– 965 –

ethernet cfm ais

period

This command configures the interval at which AIS information is sent. Use

the no form to restore the default setting.

SYNTAX

ethernet cfm ais period period md domain-name ma ma-name

no ethernet cfm ais period md domain-name ma ma-name

period – The interval at which AIS information is sent.

(Options: 1 second, 60 seconds)

domain-name – Domain name. (Range: 1-43 alphanumeric

characters)

ma-name – Maintenance association name. (Range: 1-45

alphanumeric characters)

DEFAULT SETTING

1 second

COMMAND MODE

Global Configuration

EXAMPLE

This example sets the interval for sending frames with AIS information at

60 seconds.

Console(config)#ethernet cfm ais period 60 md voip ma rd

Console(config)#

ethernet cfm ais

suppress alarm

This command suppresses sending frames containing AIS information

following the detection of defect conditions. Use the no form to restore the

default setting.

SYNTAX

[no] ethernet cfm ais suppress alarm md domain-name

ma ma-name