Edge-Core ES3510MA-DC - Displaying the ARP Inspection Log; Table 22: ARP Inspection Log; Figure 186: Displaying Statistics for ARP Inspection

C HAPTER 14 | Security Measures
ARP Inspection
– 333 –
WEB INTERFACE
To display statistics for ARP Inspection:
1. Click Security, ARP Inspection.
2. Select Show Information from the Step list.
3. Select Show Statistics from the Action list.
Figure 186: Displaying Statistics for ARP Inspection
DISPLAYING THE ARP
INSPECTION LOG
Use the Security > ARP Inspection (Show Information - Show Log) page to
show information about entries stored in the log, including the associated
VLAN, port, and address components.
CLI REFERENCES
◆ "show ip arp inspection log" on page 695
PARAMETERS
These parameters are displayed:
ARP packets dropped by
additional validation
(Src-MAC)
Count of packets that failed the source MAC address test.
ARP packets dropped by ARP
ACLs
Count of ARP packets that failed validation against ARP ACL
rules.
ARP packets dropped by
DHCP snooping
Count of packets that failed validation against the DHCP
Snooping Binding database.
Table 21: ARP Inspection Statistics (Continued)
Parameter Description
Table 22: ARP Inspection Log
Parameter Description
VLAN ID The VLAN where this packet was seen.
Port The port where this packet was seen.