C
HAPTER
14
| Security Measures
Configuring the Secure Shell
– 305 –
WEB INTERFACE
To generate the SSH host key pair:
1. Click Security, SSH.
2. Select Configure Host Key from the Step list.
3. Select Generate from the Action list.
4. Select the host-key type from the drop-down box.
5. Select the option to save the host key from memory to flash if required.
6. Click Apply.
Figure 165: Generating the SSH Host Key Pair
To display or clear the SSH host key pair:
1. Click Security, SSH.
2. Select Configure Host Key from the Step list.
3. Select Show from the Action list.
4. Select the host-key type to clear.
5. Click Clear.
Figure 166: Showing the SSH Host Key Pair
To Next Page
Loading...
Need help?
General