C
HAPTER
14
| Security Measures
Configuring 802.1X Port Authentication
– 344 –
Authenticator PAE State Machine
◆ State – Current state (including initialize, disconnected, connecting,
authenticating, authenticated, aborting, held, force_authorized,
force_unauthorized).
◆ Reauth Count – Number of times connecting state is re-entered.
◆ Current Identifier – Identifier sent in each EAP Success, Failure or
Request packet by the Authentication Server.
Backend State Machine
◆ State – Current state (including request, response, success, fail,
timeout, idle, initialize).
◆ Request Count – Number of EAP Request packets sent to the
Supplicant without receiving a response.
◆ Identifier (Server) – Identifier carried in the most recent EAP
Success, Failure or Request packet received from the Authentication
Server.
Reauthentication State Machine
◆ State – Current state (including initialize, reauthenticate).
WEB INTERFACE
To configure port authenticator settings for 802.1X:
1. Click Security, Port Authentication.
2. Select Configure Interface from the Step list.
3. Click Authenticator.
4. Modify the authentication settings for each port as required.
5. Click Apply
To Next Page
Loading...
Need help?
General