Enterasys Matrix E1 1G694-13 User Manual

Matrix E1 CLI Quick Reference Guide
CLI Tasks, Commands and Syntax
A-4 Matrix E1 Series (1G694-13) Configuration Guide
history buffer size
(show)
Displays the size (in lines) of the command history buffer. For details,
refer to Section 9.2.2.5.
show history
history buffer size
(set)
Sets the size (in lines) of the command history buffer. For details,
refer to Section 9.2.2.6.
set history size
IGMP (set)
Enables or disables IGMP (Internet Group Management Protocol)
snooping on the device. For details, refer to Section 8.2.1.2.
set igmp {enable | disable}
IGMP (show)
Displays IGMP status. For details, refer to Section 8.2.1.1.
show igmp
IGMP groups (show)
Displays a list of IGMP streams and client connection ports. For
details, refer to Section 8.2.3.1.
show igmp groups
IGMP query count
(set)
Sets the IGMP query count time (in minutes). For details, refer to
Section 8.2.2.2.
set igmp query count size
IGMP query count
(show)
Displays the IGMP query count time (in minutes). For details, refer to
Section 8.2.2.1.
show igmp query count
IGMP report delay
(set)
Sets the size (in number of queries) that must be missed before the
IGMP report delay timer is started. For details, refer to
Section 8.2.2.4.
set igmp report delay size
IGMP report delay
(show)
Shows IGMP report delay status. For details, refer to Section 8.2.2.3.
show igmp report delay
IP address (set)
Sets the local host IP address and subnet mask. For details, refer to
Section 3.2.2.11.
set ip address ip_addr [ip_mask]
CLI Task Command Function and Syntax

Enterasys Matrix E1 1G694-13 Specifications

General

Brand	Enterasys
Model	Matrix E1 1G694-13
Category	Switch
Language	English