VLAN (port, clear)
Resets the port’s 802.1Q port VLAN ID to the host VLAN ID 1. For
details, refer to Section 6.2.3.3.
clear port vlan port_string
VLAN (port, set)
Sets the port VLAN identifier (vlan_id) for one or more ports. For
details, refer to Section 6.2.3.2.
set port vlan port_string vlan_id
VLAN (port, show)
Displays ports associated with a particular 802.1Q port VLAN ID.
For details, refer to Section 6.2.3.1.
show port vlan [port_string]
VLAN (set)
Creates a new IEEE 802.1Q VLAN, or enables, or disables an
existing VLAN. For details, refer to Section 6.2.2.1.
set vlan vlan_id {create | enable | disable}
VLAN (show)
Displays all information related to a specific VLAN or all VLANs
known to the device (static and dynamic). For details, refer to
Section 6.2.1.1.
show vlan [vlan_id]
VLAN egress (clear)
Removes ports from a VLAN egress list. For details, refer to
Section 6.2.4.2.
clear vlan egress vlan_id port_string
VLAN egress (set)
Adds or removes ports on the VLAN egress list for the device. This
determines which ports will transmit frames for a particular VLAN.
For details, refer to Section 6.2.4.1.
set vlan egress vlan_id port_string [untagged]
VLAN name (clear)
Removes the name of a VLAN from the VLAN list. For details, refer
to Section 6.2.2.4.
clear vlan name vlan_id
VLAN name (set)
Sets the ASCII name for a new or existing VLAN. For details, refer to
Section 6.2.2.2.
set vlan name vlan_id vlan_name
CLI Task Command Function and Syntax
To Next Page
Loading...
