TAP Series Switch Command Line Reference
To display a list of files on a file system, use the ls command in EXEC mode.
Command Syntax
ls ( flash: | flash:/boot | udisk: |) ( STRING |)
Directory name or file name
Command Mode
Privileged EXEC
Default
None
Usage
Use the ls (Flash file system) command to display flash information.
Examples
The following is sample output from the ls command.
Switch# ls
Directory of flash:/
total 3196
-rw-r--r-- 1 1371 May 31 22:32 001E080BE6C2.1.lic
-rwxr-xr-x 1 295938 Aug 15 10:26 AQR-G2_v3.2.5_ID19866_VER537.cld
-rw-r--r-- 1 39861 Jul 5 15:07 E580_48X2Q4Z_EPLD-4.1_0410_POWERDOWN.tar.gz
drwxr-xr-x 2 2464 Sep 22 14:41 boot
drwxr-xr-x 7 760 Aug 15 10:26 cold
drwxr-xr-x 3 1016 Sep 22 14:42 conf
-rw-r--r-- 1 147 Aug 15 10:31 dhcpsnooping
-rw------- 1 151 Aug 15 10:31 dhcpv6snooping
drwxr-xr-x 2 728 Sep 4 20:53 info
-rw-r--r-- 1 909 Jul 18 13:30 init_flow
-rw-r--r-- 1 3181 Aug 15 10:09 jinl_astp
drwxr-xr-x 3 224 Aug 10 11:25 lib
To Next Page
Loading...
Need help?
General
