FS TAP Series - Page 41

TAP Series Switch Command Line Reference
41
Parameter
“
any
”
indicates ipv6 packets with
any flow label value can match this rule.
dscp DSCP_VALUE
Specify the DSCP in IPv4 packets value of the
flow rule.
DSCP = Differentiated Services Code Point.
Valid range of DSCP value is 0 – 63.
ip-precedence PRECEDENCE_VALUE
Specify the IP precedence in IPv4 packets of
the flow rule.
Valid range of IP precedence value is 0 – 7.
DSCP & ip precedence configurations are
exclusive
first-fragment
Match packets with first fragment
non-first-fragment
Match packets with non first fragment
non-fragment
Match packets with non fragment
non-or-first-fragment
Match packets with non first fragment
small-fragment
Match packets with small fragment
any-fragment
Match packets with any fragment
options
Match packets with IP options
truncation
Use this parameter to truncate the packets
matched this rule.
The length of truncation is configured by the
“truncation” command in global
configuration mode.
vlan ( VLAN_ID VLAN_WILD | any )
Specify the outer vlan id of the flow rule.
The valid range for vlan id is 0-4095.
The valid range for vlan id wildcard bits is
0x0-0xFFF.
Vlan id and wildcard bits both have 12bits, if