4.7 Configuring the Network Settings
107
4.7.6 Configuring the SNMP Settings
Set whether or not to obtain the MIB information or enable the trap notification.
For details about configuring the SNMP settings, refer to "SNMP Settings" (page 428).
1. Select [SNMP Settings] under [Network Settings].
The [SNMP Settings] window appears.
2. Specify each item.
3. To check whether trap notification is properly sent, press the [Test]
button.
Trap notification is performed.
4. Press the [OK] button.
Central Admin
Console
To Next Page
Loading...
