Fujitsu N7100

E.2 MIB Information
430
E.2 MIB Information
This section describes MIB information obtained from the MIB notification.
■ ScannerInfo
■ BrakeRoller
Key Name Key Value Description Corresponding MIB/OID
ModelName Scanner model
N7100 (fixed)
modelName
1.3.6.1.4.1.18886.1.2.2.1
SerialNo Scanner serial No.
Example: A6RCA12345
serialNo
1.3.6.1.4.1.18886.1.2.2.2
OperatingStatus Scanner power status
1: Power Off
2: Power On
operatingStatus
1.3.6.1.4.1.18886.1.2.2.4
AdfTotalThroughput ADF total throughput adfTotalThroughput
1.3.6.1.4.1.18886.1.2.2.6
FirmwareVersion Scanner firmware version
Example: 0B08
firmwareVersion
1.3.6.1.4.1.18886.1.2.2.8
ErrorStatus Scanner error status
0: No error has occurred
1: An error has occurred
errorStatus
1.3.6.1.4.1.18886.1.2.2.5
Vendor Vendor name
fujitsu (fixed)
Vendor
1.3.6.1.4.1.18886.1.2.2.9
Key Name Key Value Description Corresponding MIB/OID
Status Brake roller status
1: No replacement required
2: To be replaced soon
3: Replacement time has passed
componentInfoStatus
1.3.6.1.4.1.18886.1.2.2.3.1.1.4.1
Descr Status description
1: BRAKE ROLLER Normal
2: BRAKE ROLLER Replace soon
3: BRAKE ROLLER Replace now
componentInfoDescr
1.3.6.1.4.1.18886.1.2.2.3.1.1.7.1