Fujitsu N7100 User Manual

5.11 Editing the Scanned Data in the Scan Viewer
324
5.11.6 Deleting a Separator
When a separator is displayed in the Scan Viewer window, the separator can be deleted.
1. Press to delete the separator that you want.
A window for confirming the deletion appears.
2. Press the [OK] button.
The separator is deleted.
5.11.7 Scanning an Additional Page
On the [Scan Viewer] window, an additional page can be scanned.
1. Load the documents into the ADF paper chute.
2. On the [Scan Viewer] window, press the [Scan More] button.
 Scanning starts.
The scanning status (preview) and scan settings can be switched and shown
during a scan.
The page numbers of additional pages will follow on from the last page of the
current scanned data.
For [Print], up to 100 pages can be scanned. For other than [Print], up to 999
pages can be scanned.
When the blank page skip function is enabled, the number of scanned pages
excluding skipped blank pages is shown.
Additional pages can be scanned in place of skipped blank pages, until the
maximum number of scanned pages is reached.
 When the scan has completed, the [Scan Viewer] window opens and shows any
additionally scanned pages.
HINT
When file splitting is set, additional scanned pages are not recognized as an additional batch
and instead of this, all pages including additional pages are recognized as a batch, then split.
Example: When file splitting is set to two pages each and additional three pages are scanned
after three pages are scanned
A B C D E F A B C D E F
+
Additional pages

Fujitsu N7100 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 3048 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	25 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	50 ipm
Black/white scanning color modes	Grayscale, Monochrome
Display	LCD
Scanner type	ADF scanner
Product color	Black
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, E-mail Server, Fax, File, FTP
Sensor type	CIS
Scan file formats	JPG, PDF, TIFF
Daily duty cycle (max)	400 pages
Supported network protocols	TCP/IP(IPv4 / IPv6), DNS, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP, SNMP
Auto document feeder (ADF) input capacity	50 sheets
Maximum scan area (ADF)	216 x 355.6 mm
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A8
ISO B-series sizes (B0...B9)	B5, B6
Scanning media types supported	Business Card, Plain paper, Plastic Card, Post Card(JPN), Thick paper, Thin paper
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	40 - 209 g/m²
USB version	2.0
Standard interfaces	Ethernet, USB 1.1, USB 2.0
Input voltage	100-240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	38 W
Power consumption (PowerSave)	2 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	RoHS, ENERGY STAR
Bundled software	Scanner Central Admin Server
Ethernet LAN data rates	10, 100, 1000 Mbit/s

Weight and Dimensions

Depth	232 mm
Width	300 mm
Height	172 mm
Weight	6000 g