Fujitsu N7100 User Manual

4.14 Setting the Network Printers
158
■ Changing the Network Printer Settings
1. Select [Network Printer] under [Print].
 The [Network Printer] window appears.
2. Select the network printer with the settings that are to be changed.
3. Press the [Edit] button.
 The window for editing the network printer settings appears.
4. Change the settings.
5. Press the [OK] button.
 The changed settings are applied.
■ Removing a Network Printer
1. Select [Network Printer] under [Print].
 The [Network Printer] window appears.
2. Select the network printer that is to be removed from the printer list.
3. Press the [Remove] button.
 The window for removing a network printer appears.
4. Confirm the details of the network printer that is to be removed are
correct, and press the [Yes] button.
 The selected network printer is removed from the network printers list.
ATTENTION
 If removing a network printer is attempted while the network is not connected, the
process may be stopped while "Deleting" is displayed on the window. Before removing
a network printer, check that the network is operating normally.
 If you remove a network printer associated with the printer that is also set as a network
printer without a print server, the corresponding driver is removed from the scanner, and
as a result the network printer without a print server may not be used.

Fujitsu N7100 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 3048 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	25 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	50 ipm
Black/white scanning color modes	Grayscale, Monochrome
Display	LCD
Scanner type	ADF scanner
Product color	Black
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, E-mail Server, Fax, File, FTP
Sensor type	CIS
Scan file formats	JPG, PDF, TIFF
Daily duty cycle (max)	400 pages
Supported network protocols	TCP/IP(IPv4 / IPv6), DNS, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP, SNMP
Auto document feeder (ADF) input capacity	50 sheets
Maximum scan area (ADF)	216 x 355.6 mm
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A8
ISO B-series sizes (B0...B9)	B5, B6
Scanning media types supported	Business Card, Plain paper, Plastic Card, Post Card(JPN), Thick paper, Thin paper
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	40 - 209 g/m²
USB version	2.0
Standard interfaces	Ethernet, USB 1.1, USB 2.0
Input voltage	100-240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	38 W
Power consumption (PowerSave)	2 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	RoHS, ENERGY STAR
Bundled software	Scanner Central Admin Server
Ethernet LAN data rates	10, 100, 1000 Mbit/s

Weight and Dimensions

Depth	232 mm
Width	300 mm
Height	172 mm
Weight	6000 g