Fujitsu N7100

E.3 SNMP Trap Notification
432
E.3 SNMP Trap Notification
The SNMP trap OID is as follows:
The SNMP trap format is as follows:
Occurrence_date/time: Date/time of message notification
(Format: MM.DD.YYYY hh:mm:ss AM or PM)
Source: Name of the computer that sent the message
IP_address: IP address of the computer that sent the message
Model: Model name of the scanner where message notification
occurred
Serial_No.: Serial No. of the scanner where message notification occurred
(10 digits)
Event_type: Message type(*1)
Message_code: Message code(*2)(*3)
Message: Message description(*2)(*4)
1.3.6.1.4.1.18886.1.2.1
Occurrence_date/
time,Source,IP_address,Model,Serial_No.,Event_type,Message_code,Message
(*1): The event types are as follows:
Information: For information
Error: For error
Warning: For warning
Test: For test
(*2): For details about the message code and messages, refer to the Scanner
Central Admin User's Guide.
(*3): For test send, "0F090000" is shown.
(*4): For test send, "This is a test message from Network Scanner" is shown.