4.18 Setting a Job Sequence
198
■ Cloning a Job Sequence
This section describes how to clone a job sequence.
1. Press the [Job Menu Settings] button on the Tool Menu.
2. Press the [Job Sequences] tab.
The [Jobs List] window appears.
3. Select the job sequence to be cloned.
4. Press the [Clone] button.
The [Job Details] window appears.
5. Clone the detailed job sequence settings.
6. Press the [OK] button.
A job sequence is added to the [Jobs List] window.
■ Editing a Job Sequence
This section describes how to edit a job sequence.
1. Press the [Job Menu Settings] button on the Tool Menu.
2. Press the [Job Sequences] tab.
The [Jobs List] window appears.
3. Select the job sequence to be edited.
4. Press the [Edit] button.
The [Job Details] window appears.
5. Edit the detailed job sequence settings.
6. Press the [OK] button.
The settings of the job sequence are changed.
To Next Page
Loading...
