F.7 Editing Local Accounts
449
F.7 Editing Local Accounts
This section describes how to edit the local accounts saved in the scanner.
Up to 100 local accounts can be added.
F.7.1 Adding a Local Account
1. Select the [Local Account] tab.
2. Open the [Add Account] dialog box in either of the following ways.
Select the [Local Account] menu [Add Account].
Press the [Add Account] button on the toolbar.
3. Enter the information of the local account to be added.
Up to 64 characters can be specified for [User Name], [Password], and
[Confirm Password]. Passwords are case sensitive.
For details about e-mail address settings values, refer to "B.1 e-Mail Address
Setting Values" (page 408).
For [Comment], enter a comment on the account. Up to 256 characters can be
entered. [Comment] is case sensitive.
For [Enabled/Disabled], select whether or not to enable the account. When
[Disabled] is selected, the user cannot login.
For [Account Type], select [Regular User] for a regular user or select
[Administrator] for the administrator.
4. Press the [OK] button.
The local account is added.
ATTENTION
The following user names cannot be used:
guest, admin, fi-maintenance, fi-maintenance-ad
Spaces at the start and end of a user name are omitted if specified.
White space characters can be used in a password and comment.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
