6.7 Calibrating the Touch Panel
365
6.7 Calibrating the Touch Panel
This should be done when the touch panel responses seem out of alignment with the
positions of objects on the screen.
1. On the administrator window, select [Calibrate Screen] under [Device
Test].
The [Calibrate Screen] window appears.
2. Press the [Start] button.
A red "+" (adjustment mark) appears.
3. Touch the "+" with your fingertip.
Follow the instructions in the displayed window.
After being touched, the "+" will move to the next
calibration position. Each time it stops, touch it again.
To Next Page
Loading...
