4.13 Setting Folders for Saving Scanned Data
134
■ Registering a Network Folder (Network Path)
1. Select [Network Folder] under [Save].
The [Network Folder] window appears.
2. Press the [Add] button.
The window for selecting a network folder appears.
3. Press the [Network Path] button.
The window for adding a network folder appears.
4. Specify each item.
5. Press the [OK] button.
The network folder is added to the network folder list.
ATTENTION
Make sure you specify the domain name at the start of the path name of the network
folder.
HINT
The network folder alias will be the same as the alias specified in this window. For
details on changing the network folder alias, refer to "Renaming a Network Folder"
(page 135).
The authentication window may appear.
To Next Page
Loading...
