4.13 Setting Folders for Saving Scanned Data
133
3. Select a domain .
The network tree expands and the subordinate computer names are displayed.
If an authentication window is displayed, enter a user name and password. If
authentication is successful, the subordinate computer names are displayed.
4. Select a computer .
The network tree expands and the subordinate network folder names are
displayed.
If an authentication window is displayed, enter a user name and password. If
authentication is successful, the subordinate network folder names are
displayed.
5. Select a network folder .
The selected folder will be opened to show any sub-folders, which themselves may
be selected in turn (up to seven levels deep, including the parent domain).
6. Press the [OK] button.
The selected network folder is added to the network folder list.
HINT
The default network folder alias will be the same as the alias selected from the network
tree. For details on changing the network folder alias, refer to "Renaming a Network
Folder" (page 135).
To Next Page
Loading...
