4.12 Setting the Fax Server
130
4.12 Setting the Fax Server
Set the fax server.
1. Select [Fax Server] under [Fax].
The [Fax Server] window appears.
2. Specify each item.
For details about e-mail address settings values, refer to "B.1 e-Mail Address
Setting Values" (page 408).
3. Press the [OK] button.
The information entered is set.
Central Admin
Console
ATTENTION
To use Internet FAX, it may be required to enter information such as a password in the Body.
To enhance the security, enable SSL in [SMTP Server] on the administrator window.
Note that the FAX service needs to support SSL.
To Next Page
Loading...
