Fujitsu N7100

5.9 Setting the Scan Options
284
5.9.3 Setting Paper
You can set the paper scanning side, the feed direction to load paper in the scanner, and
the paper size.
1. Select [Paper] under [Basic] on the scan settings window.
 The [Paper] window appears.
2. Select the paper scanning side, the feed direction to load paper in the
scanner and the paper size.
3. When [Custom] is selected in Step 2, specify [Unit] and the paper size
for the displayed setting items.
4. Press the [OK] button.
 The information entered is set.
HINT
When [Custom] is selected, any paper size can be specified for the scanned data.