Fujitsu N7100

6.6 Performing a Scan Test
362
6.6 Performing a Scan Test
After scanner cleaning or replacement of consumable parts, perform a scan test.
■ Regular User
1. On the [Main Menu] or [Job Menu] window, press the [Maintenance]
button.
 The [Maintenance] window appears.
2. Press the [Scan Test] button.
 The [Scan Test] window appears.
3. Load the document into the ADF paper chute for the scan test.
HINT
The [Maintenance] button on the [Job Menu] window can be shown by pressing .