Fujitsu N7100

5.14 Processing a Job
335
5.14.3 Checking the Number of Sheets to Be Scanned
When a job is processed, the expected number of sheets to be scanned can be specified,
so that the actual number of scanned sheets can be checked after a scan.
1. On the [Job Menu] window, press a Job button.
2. On the [Scan Count] window, enter the number of sheets that are to be
scanned.
HINT
If either of the following settings is selected for the job sequence setting, the [Scan Count]
window is not shown.
 The [Scan Count] is not to be checked
 The [Scan Count] is to be checked, but the [Scan Count] window is set not to appear (The
[Allow per-Job adjustment] check box in the [Check the Scan Count] on the [Job Details]
window is not selected)