G.4 Using the Settings of the IPv6 Function for the Scanner in Other Scanners
469
G.4.2 Backing-up and Restoring System Settings
The following tables show whether or not backed-up system settings of N7100 that is
updated to support IPv6 (01.07.01 or later) and backed-up system settings of N7100 that
is not updated to support IPv6 (lower than 01.07.01) are restored to other scanners.
Yes: Restorable —: Not Restorable
Yes: Restorable —: Not Restorable
Backed-up Data N7100 Updated to Support IPv6: IPv6 Function Enabled
Restored to
N7100 Updated to Support IPv6
N7100 Not
Updated to
Support IPv6
IPv6 Function
Enabled
IPv6 Function
Disabled
IPv6 Function Enabled Enabled —
IP Address (IPv4) Yes Yes —
IP Address (IPv6) Yes Yes —
DNS Server (IPv4) Yes Yes —
DNS Server (IPv6) Yes Yes —
Other Setting Items Yes Yes —
Backed-up Data N7100 Updated to Support IPv6: IPv6 Function Disabled
Restored to
N7100 Updated to Support IPv6
N7100 Not
Updated to
Support IPv6
IPv6 Function
Enabled
IPv6 Function
Disabled
IPv6 Function Disabled Disabled —
IP Address (IPv4) Yes Yes Yes
IP Address (IPv6) Yes(*) Yes(*) —
DNS Server (IPv4) Yes Yes Yes
DNS Server (IPv6) Yes(*) Yes(*) —
Other Setting Items Yes Yes Yes
(*): Since the settings in which the IPv6 function is disabled are restored, IPv6 infor-
mation is not restored.