Fujitsu N7100 - Uploading an Add-In Settings File; Setting Whether to Show the Keyboard Icon When Running an Add-In

4.17 Maintaining the System
181
■ Uploading an Add-in Settings File
1. Select [Add-in Software] under [Maintenance].
 The [Add-in Software] window appears.
2. Press the [Install] button.
 The window for specifying an Add-in appears.
3. Press the [Browse] button for [Specify an Add-in settings file.] and
specify the Add-in settings file to be uploaded.
4. Press the [Upload] button.
 The specified Add-in settings file is saved in the folder that is used for managing
the scanner Add-in modules.
■ Setting Whether to Show the Keyboard Icon When Running an
Add-in
The keyboard icon is shown in the top right corner of the touch panel.
You can set whether to show these icons on the window when running an Add-in.
1. Select [Add-in Software] under [Maintenance].
 The [Add-in Software] window appears.
2. When multiple Add-ins are installed, select the target Add-in from the
list.
3. For [Show On-Screen Keyboard], select whether or not to show the on-
screen keyboard when running an Add-in.
4. Press the [Set] button.
 This setting is reflected in the Add-in list.
Touch
Panel