Fujitsu N7100

7.6 Pre-Maintenance Preparations
398
7.6 Pre-Maintenance Preparations
Before sending the scanner for maintenance, the user data store and system settings
should be backed up.
 "Backing up the User Data Store" (page 169) in "4.16.1 Maintaining the User Data
Store" (page 167)
 "4.16.2 Maintaining the System Settings" (page 171)
After backing them up, refer to the following and delete the user data store and system
settings.
If the hard disk (SSD) is replaced, all settings will revert to their factory default values.
 "Clearing the User Data Store" (page 170) in "4.16.1 Maintaining the User Data
Store" (page 167)
 "Resetting to Factory Defaults" (page 174) in "4.16.2 Maintaining the System
Settings" (page 171)
ATTENTION
User data may contain private information such as information on e-mail senders and fax
numbers, so care should be taken when managing such data.