4.18 Setting a Job Sequence
202
4.18.3 Setting a Job Menu
Assign the job sequence set in "4.18.2 Setting a Job Sequence" (page 192) to a job
button, and job buttons on a job menu.
Up to 100 job menus can be set.
■ Adding a Job Menu
This section describes how to add a job menu.
1. Press the [Job Menu Settings] button on the Tool Menu.
2. Press the [Job Menus] tab.
The [Job Menus List] window appears.
3. Press the [New] button.
4. Enter a job menu name in [Job Menu Name].
HINT
For details about displaying the window for setting a job sequence via Central Admin
Console, refer to the Scanner Central Admin User's Guide.
To Next Page
Loading...
