4.18 Setting a Job Sequence
200
■ Filtering the LDAP List
This section describes how to filter the LDAP List on the [LDAP List] window.
1. Specify each item on the [LDAP List] window.
2. Select the [Find] button.
The filtered results appear.
HINT
If the [Find] button is selected, an authentication window appears.
Enter a [User Name] and [Password], and then press the [OK] button.
User names may be up to 129 characters long.
Passwords may be up to 256 characters long. [User Name] and [Password] are case
sensitive.
To Next Page
Loading...
