Fujitsu N7100 User Manual

4.6 Configuring the Login-Related Settings
97
4.6.3 Setting the Standby Mode
You can set the transition time for automatic logout, the standby mode, and power-off.
 For any window after regular user login, if no operations are performed for the
specified period of time for [Logout after], the scanner automatically logs the user
out.
 [Standby Mode] is a function that automatically switches the scanner to standby
mode if no operations are performed for a specified period of time on the [Login]
window or any other window after a regular user logs in.
By using the [Turn off the display only] setting, standby mode can be changed.
When the power button is pressed, the scanners start up from standby mode.
The window displayed after restarting varies according to the automatic login
settings in the following way:
 If automatic login is enabled, the operation window is displayed.
 If automatic login is disabled, the [Login] window is displayed.
For details about window transitions, refer to "Using the Power Button" (page 53).
When setting the time for [Standby after], the time until the scanner logs the user
out must also be included.
 If no operations are performed for the specified period of time for [Power-off after]
when the scanner power is left on, the scanner power is automatically turned off.
The scanner enters standby mode first. If no further operations are performed in
standby mode, the scanner power is automatically turned off.
When setting the time for [Power-off after], the time until the scanner enters
standby mode must also be included.
Touch
Panel
Central Admin
Console
HINT
 The scanner does not logout while the following operations are ongoing:
 Scanning documents
 e-Mailing a scan
 Faxing a scan
 Printing a scan
 Saving a scan
 Automatic login is enabled
 When automatic login is enabled, the main menu window appears (the job menu
window appears if the job menu is selected for the initial post-login menu in the job
groups tab) when the logout wait time has been exceeded.
 The time that is selected in [Logout after] never becomes invalid whether you enable
the automatic login or not.

Fujitsu N7100 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 3048 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	25 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	50 ipm
Black/white scanning color modes	Grayscale, Monochrome
Display	LCD
Scanner type	ADF scanner
Product color	Black
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, E-mail Server, Fax, File, FTP
Sensor type	CIS
Scan file formats	JPG, PDF, TIFF
Daily duty cycle (max)	400 pages
Supported network protocols	TCP/IP(IPv4 / IPv6), DNS, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP, SNMP
Auto document feeder (ADF) input capacity	50 sheets
Maximum scan area (ADF)	216 x 355.6 mm
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A8
ISO B-series sizes (B0...B9)	B5, B6
Scanning media types supported	Business Card, Plain paper, Plastic Card, Post Card(JPN), Thick paper, Thin paper
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	40 - 209 g/m²
USB version	2.0
Standard interfaces	Ethernet, USB 1.1, USB 2.0
Input voltage	100-240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	38 W
Power consumption (PowerSave)	2 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	RoHS, ENERGY STAR
Bundled software	Scanner Central Admin Server
Ethernet LAN data rates	10, 100, 1000 Mbit/s

Weight and Dimensions

Depth	232 mm
Width	300 mm
Height	172 mm
Weight	6000 g