EasyManuals Logo

Fujitsu N7100 User Manual

Fujitsu N7100
487 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #96 background imageLoading...
Page #96 background image
4.6 Configuring the Login-Related Settings
96
3. Set [Wait Job].
4. Press the [OK] button.
The information entered is set.
ATTENTION
Even if you select [No], if the process of sending is not complete, you cannot log out or
turn the power off.
HINT
If you select [Yes], the window indicating that the process is in progress appears until
the process of sending a scanned image is complete. In this case, you can scan the
next document as well as perform any other operations in the window after the process
of sending is complete.
If you select [No], you can scan the next document as well as perform any other
operations in the window before the process of sending completes. The process of
sending is temporarily saved and each process is performed in sequence.
You can check the status of the send process in the [Send Status] window, which is
shown by pressing the [Send Status] button in the [Main Menu] window or the [Job
Menu] window.

Table of Contents

Other manuals for Fujitsu N7100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu N7100 and is the answer not in the manual?

Fujitsu N7100 Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth- bit
Maximum scan size216 x 3048 mm
Output color depth24 bit
ADF scan speed (b/w, A4)25 ppm
Optical scanning resolution600 x 600 DPI
Duplex ADF scan speed (b/w, A4)50 ipm
Black/white scanning color modesGrayscale, Monochrome
DisplayLCD
Scanner typeADF scanner
Product colorBlack
Display diagonal8.4 \
Display resolution1024 x 768 pixels
Scan toE-mail, E-mail Server, Fax, File, FTP
Sensor typeCIS
Scan file formatsJPG, PDF, TIFF
Daily duty cycle (max)400 pages
Supported network protocolsTCP/IP(IPv4 / IPv6), DNS, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP, SNMP
Auto document feeder (ADF) input capacity50 sheets
Maximum scan area (ADF)216 x 355.6 mm
Minimum scan area (ADF)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6, A8
ISO B-series sizes (B0...B9)B5, B6
Scanning media types supportedBusiness Card, Plain paper, Plastic Card, Post Card(JPN), Thick paper, Thin paper
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight40 - 209 g/m²
USB version2.0
Standard interfacesEthernet, USB 1.1, USB 2.0
Input voltage100-240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Power consumption (standby)1 W
Power consumption (typical)38 W
Power consumption (PowerSave)2 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesRoHS, ENERGY STAR
Bundled softwareScanner Central Admin Server
Ethernet LAN data rates10, 100, 1000 Mbit/s
Weight and Dimensions IconWeight and Dimensions
Depth232 mm
Width300 mm
Height172 mm
Weight6000 g

Related product manuals