5.10 Enabling/Disabling the Scan Viewer
313
5.10 Enabling/Disabling the Scan Viewer
The [Scan Viewer] window can be set to appear before the scanned data is processed.
Scanned data can be checked on the [Scan Viewer] window. The scanned data can be
edited on the scan viewer details window which is displayed after a scanned image is
selected.
For details, refer to "5.11 Editing the Scanned Data in the Scan Viewer" (page 316).
If desired, in the following windows, the [Scan Viewer] window can be set to appear
before the scanned data is finally processed.
[Send e-Mail] window
[Send Fax] window
[Print] window
[Save] window
[Scan to SharePoint] window
[Job Menu] window
The following explains how to enable or disable the [Scan Viewer] window using the
[Send e-Mail] window.
1. Press the toggle button for [Scan Viewer] in the [Send e-Mail] window.
Pressing this button displays or does not display the [Scan Viewer] window.
Operations vary according to whether [Scan Viewer] is set to [On] or [Off].
If sending an e-mail, scan operation proceeds as follows:
ATTENTION
When [Scan Viewer] is disabled on the [Job Menu] window, it is not possible to select whether
or not to show the [Scan Viewer] window.
To Next Page
Loading...
