EasyManuals Logo

Fujitsu N7100 User Manual

Fujitsu N7100
487 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #386 background imageLoading...
Page #386 background image
7.3 Other Troubleshooting
386
" The status window with the message "Printing scan data on xxx"remains or is slow."
(page 393)
" An error occurs when installing an Admin Tool." (page 393)
" When a fax is sent, the screen freezes on the scanning window." (page 393)
Scanner Cannot Be Turned On
Check item
Has the power button been pressed?
Action
Press the power button.
Check item
Are the AC cable and AC adapter properly connected to the scanner?
Action
Connect the AC cable and the AC adapter.
Disconnect the AC cable from the scanner to turn off the scanner, and connect the AC cable
again. After turning the power off, wait for at least 10 seconds before turning the power back
on again.
If the problem persists even after taking the above mentioned actions, contact your FUJITSU
scanner dealer or an authorized FUJITSU scanner service provider.
Scanner Does Not Start Up
Check item
After turning the scanner on, was the power turned off immediately?
Action
Press the power button.
Disconnect the AC cable from the scanner to turn off the scanner, and connect the AC cable
again. After turning the power off, wait for at least 10 seconds before turning the power back
on again.
If the problem persists even after taking the above mentioned actions, contact your FUJITSU
scanner dealer or an authorized FUJITSU scanner service provider.
Check item
After turning the scanner off, was the power turned back on again
immediately?
Action
Press the power button.
Scanner cannot be turned on.
The "The last attempt to restart ..." message is shown on the window
and the scanner does not start up.
Scanner does not resume from standby mode.

Table of Contents

Other manuals for Fujitsu N7100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu N7100 and is the answer not in the manual?

Fujitsu N7100 Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth- bit
Maximum scan size216 x 3048 mm
Output color depth24 bit
ADF scan speed (b/w, A4)25 ppm
Optical scanning resolution600 x 600 DPI
Duplex ADF scan speed (b/w, A4)50 ipm
Black/white scanning color modesGrayscale, Monochrome
DisplayLCD
Scanner typeADF scanner
Product colorBlack
Display diagonal8.4 \
Display resolution1024 x 768 pixels
Scan toE-mail, E-mail Server, Fax, File, FTP
Sensor typeCIS
Scan file formatsJPG, PDF, TIFF
Daily duty cycle (max)400 pages
Supported network protocolsTCP/IP(IPv4 / IPv6), DNS, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP, SNMP
Auto document feeder (ADF) input capacity50 sheets
Maximum scan area (ADF)216 x 355.6 mm
Minimum scan area (ADF)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6, A8
ISO B-series sizes (B0...B9)B5, B6
Scanning media types supportedBusiness Card, Plain paper, Plastic Card, Post Card(JPN), Thick paper, Thin paper
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight40 - 209 g/m²
USB version2.0
Standard interfacesEthernet, USB 1.1, USB 2.0
Input voltage100-240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Power consumption (standby)1 W
Power consumption (typical)38 W
Power consumption (PowerSave)2 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesRoHS, ENERGY STAR
Bundled softwareScanner Central Admin Server
Ethernet LAN data rates10, 100, 1000 Mbit/s
Weight and Dimensions IconWeight and Dimensions
Depth232 mm
Width300 mm
Height172 mm
Weight6000 g

Related product manuals