7.3 Other Troubleshooting
393
■ Check item
Is there enough free space in the drive on which the spool folder for the print
server exists?
■ Action
Make sure that there is enough space in the drive.
■ Check item
Is the language of the Admin Tool already installed different from that of the
operating system?
■ Action
Uninstall the existing Admin Tool. Then, install the Admin Tool of the same language as that of
the operating system.
■ Check item
Was the Scan button pressed repeatedly during scanning?
Do not press the Scan button before scanning is completed.
■ Action
Disconnect the AC cable from the scanner to turn off the scanner, and connect the AC cable
again. After turning the power off, wait for at least 10 seconds before turning the power back on
again.
If the problem persists even after taking the above mentioned actions, contact your FUJITSU
scanner dealer or an authorized FUJITSU scanner service provider.
The status window with the message "Printing scan data on
xxx"remains or is slow.
An error occurs when installing an Admin Tool.
When a fax is sent, the screen freezes on the scanning window.
To Next Page
Loading...
