4.15 Viewing the Scanner Details
165
4.15.5 Managing the System Log
System information logs (such as for startup, shutdown, and system errors) are saved in
the scanner.
■ Viewing the System Log Details
The system log summary is shown in date/time order. Even if the [Region / Timezone] or
[Date / Time] settings are changed, the order of the log entries will not be changed.
1. Select [System Log] under [Status Details].
The [System Log] window appears.
(Example of the Administrator Windows via the Admin Tool)
2. Select the log you wish to view and press the [Details] button.
The details of the selected log are displayed.
Pressing the [OK] button returns to the [System Log] window.
ATTENTION
System logs may contain private information such as information on e-mail senders and fax
numbers, so care should be taken when managing such data.
If a log file error is detected during scanner operation, the log file will be cleared and the log
entry "Error 81001003 Corrupted system log file was deleted." is recorded.
HINT
The [Date] format specified on the [Date / Time] window is used. For details, refer to "4.4.4
Setting the Date/Time" (page 84).
The information of "Error" and "Warning" in [Type] will be sent to the e-mail address set in
"4.17.6 Setting the Destination for Alert Notifications" (page 184).
To Next Page
Loading...
