Fujitsu N7100 User Manual

4.9 Configuring the Network Admin Settings
113
3. Press the [OK] button.
 The information entered is set.
 If [Central Admin] is enabled, the scanner information is sent to the Central
Admin Server.
If the process is successful, [Scanner Central Admin Server Registration Status]
changes to [Registered].
 If "Update Scheduler" is enabled, the following operations occur:
 Automatic updates start when the scanner is in a standby mode or when no user is
logged in while it is turned on.
Updates are also performed on a specified date and time even with notifications
from the Central Admin Server or in an environment in which Wake On LAN cannot
be used.
 When Wake On LAN is enabled, automatic updates start even if the power is off
 When the setting for an automatic update from the Central Admin Server is
distributed to the scanners, if the update is scheduled to start within ten minutes
after the setting was distributed, the setting will not be applied.
To enable new system settings in an environment where update calls cannot be
issued, scanners must be restarted or logged out. In order to prevent software
updates from running at the same time, enable software update time-period
restrictions. System settings can be updated even when software updates are
restricted. For details, refer to the Scanner Central Admin User's Guide.
 If the scheduled automatic update time is set in both the Central Admin Console
and with the Admin Tool, the most recent settings will be enabled.

Fujitsu N7100 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 3048 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	25 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	50 ipm
Black/white scanning color modes	Grayscale, Monochrome
Display	LCD
Scanner type	ADF scanner
Product color	Black
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, E-mail Server, Fax, File, FTP
Sensor type	CIS
Scan file formats	JPG, PDF, TIFF
Daily duty cycle (max)	400 pages
Supported network protocols	TCP/IP(IPv4 / IPv6), DNS, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP, SNMP
Auto document feeder (ADF) input capacity	50 sheets
Maximum scan area (ADF)	216 x 355.6 mm
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A8
ISO B-series sizes (B0...B9)	B5, B6
Scanning media types supported	Business Card, Plain paper, Plastic Card, Post Card(JPN), Thick paper, Thin paper
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	40 - 209 g/m²
USB version	2.0
Standard interfaces	Ethernet, USB 1.1, USB 2.0
Input voltage	100-240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	38 W
Power consumption (PowerSave)	2 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	RoHS, ENERGY STAR
Bundled software	Scanner Central Admin Server
Ethernet LAN data rates	10, 100, 1000 Mbit/s

Weight and Dimensions

Depth	232 mm
Width	300 mm
Height	172 mm
Weight	6000 g