Fujitsu N7100 User Manual

4.13 Setting Folders for Saving Scanned Data
146
2. Specify each item.
3. Check the file name format.
4. Press the [OK] button.
 The file name format is set.
HINT
The following explains the way in which sequence numbers are added.
 Sequence numbers start from 1. When there are files with file names containing
sequence numbers, sequence numbers following the largest value will be used.
For example, if the file name is "A", sequence numbers are set to be added in 3 digits,
and "A001.pdf" and "A004.pdf" already exist, subsequent file names are assigned in the
following order.
"A005.pdf", "A006.pdf", "A007.pdf", "A008.pdf"...
File names "A002.pdf" and "A003.pdf" are skipped.
 If the sequence number exceeds the setting in the [Seq. Number], subsequent file
names are assigned using the next digit.
For example, if the file name is "A", sequence numbers are set to be added in 3 digits,
and "A001.pdf" to "A998.pdf" already exist, subsequent file names are assigned in the
following order.
"A999.pdf", "A1000.pdf", "A1001.pdf", "A1002.pdf"...
 The maximum sequence number is "4294967295". If it is exceeded, the skipped
minimum number is used for the sequence number.
For example, if the file name is "A", sequence numbers are set to be added in 3 digits,
and "A001.pdf", "A003.pdf", and "A4294967295.pdf" already exist, subsequent file
names are assigned in the following order.
"A002.pdf", "A004.pdf", "A005.pdf", "A006.pdf"...
 When multiple sheets are scanned in one go, consecutive numbers may be added to
the names of JPEG files, single page TIFF files, and single page PDF files.
Numbers are added to the names of JPEG files, single page TIFF files, and single page
PDF files (one image per file), but are not added to the names of multiple page PDF
files or multiple page TIFF files (multiple images per file).
For example, when multiple files are saved as a single page TIFF file, a single page
PDF file, or a JPEG file, the numbers are added in consecutive order at the end of a file
name as follows:
"abc-0001.tif" "abc-0001.pdf" "abc-0001.jpg"

Fujitsu N7100 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 3048 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	25 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	50 ipm
Black/white scanning color modes	Grayscale, Monochrome
Display	LCD
Scanner type	ADF scanner
Product color	Black
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, E-mail Server, Fax, File, FTP
Sensor type	CIS
Scan file formats	JPG, PDF, TIFF
Daily duty cycle (max)	400 pages
Supported network protocols	TCP/IP(IPv4 / IPv6), DNS, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP, SNMP
Auto document feeder (ADF) input capacity	50 sheets
Maximum scan area (ADF)	216 x 355.6 mm
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A8
ISO B-series sizes (B0...B9)	B5, B6
Scanning media types supported	Business Card, Plain paper, Plastic Card, Post Card(JPN), Thick paper, Thin paper
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	40 - 209 g/m²
USB version	2.0
Standard interfaces	Ethernet, USB 1.1, USB 2.0
Input voltage	100-240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	38 W
Power consumption (PowerSave)	2 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	RoHS, ENERGY STAR
Bundled software	Scanner Central Admin Server
Ethernet LAN data rates	10, 100, 1000 Mbit/s

Weight and Dimensions

Depth	232 mm
Width	300 mm
Height	172 mm
Weight	6000 g