Fujitsu N7100

4.18 Setting a Job Sequence
191
Processing a job
For details, refer to
"5.14 Processing a
Job" (page 330).
 By setting [On] for [Job Mode] on the
[Scanner Central Admin Server] window,
which is displayed by selecting [Scanner
Central Admin Server] under [Network
Admin], and releasing job mode settings
on the [Job Mode Settings] window of
Central Admin Console, the job mode
settings set on the job mode edit window,
which is displayed by pressing the [Job
Mode Settings] button, are executed.
 By setting [Off] for [Job Mode] on the
[Scanner Central Admin Server] window,
which is displayed by selecting [Scanner
Central Admin Server] under [Network
Admin], the jobs set on the job settings
menus in the Admin Tool are executed.