4.18 Setting a Job Sequence
193
5. Press to the left of [Common Settings], and set the operations for
when a job is processed.
ATTENTION
The layout of the message displayed in the message screen settings, and the actual
[Message Screen] layout on the scanner may differ. Check the message layout on the
scanner, and set the message.
HINT
Press the [Name Format] button to specify a [Common File Name] on the [File Names
(Common)] window.
[Sub-folder Name Format] is enabled only when scanned data is saved to a folder. For
details about setting values, refer to "4.13.4 Setting a File Name Format for When
Saving Scanned Data" (page 145).
To Next Page
Loading...
