4.18 Setting a Job Sequence
209
12. In the [Member Name] list of [Member Search], select the check box of a
user name, Active Directory group, or local account to be added to a job
group.
13. Press the [<<<] button.
The user, Active Directory group, or local account is added to the [Group
Membership List].
14. Press the [OK] button.
The number of members registered as job group members is shown in [Number
of Members] on the [Settings For Selected Group(s)] window.
15. Specify the members to be included in the job group in [Group Member
Settings].
16. Press the [Register] button.
A job group is added to the [Job Groups List] window.
HINT
To filter the LDAP List, refer to "Filtering the LDAP List" (page 213) for more details.
HINT
Up to 1,000 members can be added as job group members.
To delete a member added to the [Group Membership List], select the check box in the
[Member Name] list, and then press the [>>>] button.
HINT
If the [Include all LDAP users as members] check box is selected, all LDAP users are
included regardless of the selection of LDAP users in [Group Membership List].
To Next Page
Loading...
Need help?
General
Weight and Dimensions
